Scrap Metal Removal Without the Guesswork
Fencing, pipe, old appliances, shelving — if it's metal and it's in your way, we load it up and it's gone.
What Scrap Metal Removal Includes
Scrap metal removal is a crew loading up whatever metal you're done with — old appliances, fencing, pipe, shelving — and routing it toward a scrap yard instead of the landfill. It works for a single item or a garage full of it.
- Old appliances (for scrap)
- Metal fencing & gates
- Pipe, ductwork & gutters
- Structural steel & rebar
- Metal shelving & racking
- Drums & barrels
- Patio & lawn equipment frames
Clearing out a garage or shed full of old metal parts
Hauling off the old fence or gate after a replacement
Leftover pipe, ductwork, and rebar from a construction job
Who Books Scrap Metal Removal
Contractor
Leftover pipe, rebar, and ductwork from a job site that needs to clear out.
Homeowner replacing a fence or gate
The old metal fencing has to go before the new one goes in.
Property owner cleaning out a garage
Years of old parts, shelving, and scrap that finally need to leave.
DIY renovator
Metal left over from a project — old pipe, fixtures, or framing.
Hobbyist or handyman
An accumulated pile of scrap that's outgrown the garage corner it's been living in.
How Long Scrap Metal Removal Takes
A single item or a small, already-sorted pile is a quick stop. A garage or shed full of mixed metal takes longer, since our crew has to sort it from wood, plastic, and trash before it can be loaded. A job-site load of similar material, like rebar or pipe, moves faster than a mixed pile even when there's more of it, because there's nothing to sort.
- Single item or small pile
- One old appliance or a bundle of fencing, loaded and gone quickly.
- Mixed garage or shed cleanout
- Takes longer since metal has to be sorted from everything else first.
- Bulk job-site load
- More volume, but faster per pound since it's already one type of material.
How Pricing Works
Metal prices mostly on weight, not on the size of the pile. Whether it's already sorted by type, and whether it's steel or a lighter metal like aluminum, both change how easily the load moves through the recycling stream.
Weight, not size
A modest pile of pipe or rebar can weigh more than a whole load of lighter junk, and weight drives most of the price.
Clean loads vs mixed
Metal already separated from wood, plastic, or trash is faster to load and route to a scrap buyer than a pile our crew has to sort first.
Ferrous vs non-ferrous
Steel and iron move through the recycling stream differently than aluminum, copper, or brass.
Size & shape
Long pieces like fencing or ductwork take extra time to break down or bundle even when they aren't especially heavy.
Send a photo showing roughly how much metal and what kind it is, and we'll send back a fixed price — no obligation to book.
Scrap Metal Removal vs Renting a Dumpster
Metal has scrap value that a landfill-bound dumpster load doesn't capture — once it's mixed in with everything else in a bin, it's treated as trash instead of routed to a buyer.
| Factor | Scrap Metal Removal with a crew | Renting a dumpster |
|---|---|---|
| Where it ends up | Clean metal gets routed to a scrap buyer. | Metal mixed into a general load usually just goes to the landfill with everything else. |
| Sorting | Our crew separates metal from wood, plastic, and trash on site. | Sorting is on you if you want the metal handled any differently. |
| Weight limits | We price the load by weight, no separate cap to run into. | Dense metal like rebar or steel can blow past a dumpster's weight limit fast, triggering overage fees. |
| Driveway space | No bin sitting on your property. | Needs a spot to sit for the length of the rental, sometimes with a permit on the street. |
| Best for | A load that's mostly or entirely metal. | A slow-filling job site where metal is a smaller part of a bigger, longer cleanup. |
If metal is most of what's coming out, keeping it separate for scrap beats tossing it in a mixed bin. A dumpster still makes sense on a long job site where metal is just a portion of a steady trickle of other debris.
What We Can and Can't Take
We take
- Old appliances (for scrap)
- Metal fencing & gates
- Pipe & ductwork
- Structural steel & rebar
- Metal shelving & racking
- Drums & barrels
- Gutters & downspouts
- Patio & lawn equipment frames
We can't take
- Hazardous waste
- Paint & chemical containers
- Solvents
- Asbestos-wrapped pipe insulation
- Tires (even with metal rims)
- Medical waste
- Propane tanks
A paint can or chemical container mixed into a metal pile needs to go through PaintCare or the county's household hazardous waste program rather than coming with the load.
Where Your Load Actually Ends Up
Metal is sorted by type before it goes anywhere — ferrous metal like steel and iron moves through a different recycling stream than non-ferrous metal like aluminum, copper, or brass. Clean, sorted metal has almost no reason to end up in a landfill; only material still attached to non-metal parts we can't separate does.
Recycled — ferrous
Steel, iron, and rebar routed to a scrap buyer for that material stream.
Recycled — non-ferrous
Aluminum, copper, and brass sorted and routed separately, since they're worth more.
Landfilled
Only the rare piece too contaminated with non-metal material to separate.
How to Get Ready for Scrap Metal Removal
- Separate metal from wood, trash, and other junk where you can.
- Stack or bundle long pieces like fencing or pipe.
- Clear a path to the driveway or curb.
- Flag anything still attached to a structure, like a fence still in the ground.
- Note any residue like old fuel or fluids in tanks or equipment.
None of this is required — a pre-sorted pile just loads faster.
Scrap Metal Removal Near Me — How Our Coverage Works
Scrap metal pickup near you works the same as everywhere else we run — the crew and truck come to your address instead of you hauling metal anywhere yourself. We're organized by coverage area, not a branch office, so job sites and residential addresses both get checked the same way.
Drop your ZIP into the quote request and we'll let you know if we're running scrap pickups in your area.
Where We Offer Scrap Metal Removal
San Diego is where we're currently running scrap metal pickups.
Also available
Frequently Asked Questions
Does the metal need to be separated from other junk before you arrive?
It helps, but it's not required — a mixed pile just takes our crew a bit longer to sort on site.
Can you handle heavy stuff like rebar or steel beams?
Yes, that's normal for this job. Weight is exactly what this service is built around.
Is there a minimum amount of metal you'll come out for?
A single item, like one old appliance or a small pile of fencing, is still a job we'll take.
Are old appliances handled as scrap metal or under a different service?
Either works — appliances have their own removal service too, but a batch of them going straight to scrap fits fine here.
Do you offer scrap metal pickup near me for job sites, not just houses?
Yes — job sites are a normal booking for us alongside residential pickups. We assign coverage by area, so send your ZIP or job-site address with your quote request.
Tell us what needs to go
Send a photo, get a fixed price, pick a window. No charge for the estimate.
(858) 859-0089